20tubes Compact Pressurized Stainless Steel Heat Pipe Solar Water
Heater for Slope Roof
Easy to install,cause tubes works indirect heating way, no water in
tube ,even one tube broken,it will not effect the system working.
|Description||Compact Pressurized Stainless Steel Heat Pipe Solar Water Heater|
|Material of out tank||0.31mm thickness stainless steel SUS304-BA|
|Material of inner tank||1.2mm Food grade SUS304 stainless steel|
|Tank insulating layer||55mm 45kg/m³ high-density polyurethane foamed|
|Inlet and outlet hole||Male G 1/2,3/4|
|Solar collector tube||3.3 Borosilicate glass with N/Al coating|
|Thickness of glass tube||1.6mm|
|Vacuum tube tightness||P≤0.005 Pa|
|Emission ratio||εh=0.04-0.06 (80C±5C)|
|Idle sunning property parameters||Y=220~260m2.C/KW|
|Average heat loss coefficient||ULT=0.6~0.7W/(m2.C)|
|Bracket:||2mm thickness Aluminum Alloy|
|Structure of tank||design with air vent,water inlet and outlet, El. Heater and mag.
|Fastening pieces||Made of stainless steel screw|
|Tube quantity||58x1,800mmx24tube with heat pipe|
remark :Extremly hot place,we design one more air release port for
tank to make sure the safety of tank.
1. Inner Tank: 1.2mm food-grade stainless steel SUS 304-2B with seamless
argon-arc welding, more than 30 years lifespan
2.Tank Exterior Shell: Stainless Steel shell SUS304 with its good performance for
anti-rust and nice looking appearance makes it popularity in most
3.Insulation Layer: High-density polyurethane integrated foam-forming with twice
slaking treatment ensures long lasting heat preservation 55mm
4.Bracket: strong Supporting bracket design to anti-wind, aluminum material for
5. Electrical Heater: as the backup while there is no sun or cloudy day.
6. Intelligent Controller: Automatically controls the operation of electric heater
working,while low temperature or no sun day,it control EH to
7. Anode Magnesium: with its anode consumption to protect solar system from water
scale and erosion
8. T&P & Safety Valve: Protecting water tank and pipeline from excessive pressure and
Compact Pressurized Stainless Steel Heat Pipe Solar Water Heater Feature
1.The solar heater tank is closed container, therefore, it must
bear the pressure came from tap water and hot water,it works with
pressure,hot water comes out for using with pressure makes the
2.Vacuum tube absorbs solar energy, and conductive copper pipe
transfers the heat into the pressurized solar water heater tank.
These indirect heating conduct way improve the heating
effeciency.No water in tubes,even one tube broken,the system
Domestic hot water for shower, washing
1. High efficiency, rapid water heating with INLIGHT heat pipe
2. INLIGHT three-target tube for heat pipe ensures no fall-off coat
under high temperature;
3. Breaking or withdrawing one or several heat pipe tubes does not
drain the solar system.
4. INLIGHT heat pipe tube is designed to work within temperature
rage (-)40 oC ~ 300 oC;
5. Every of INLIGHT heat pipe have been tested before delivery to
ensure no dead heat pipe;
6. The whole solar system is pressurized and works under high water
7. INLIGHT water storage tank is designed to bear 100,000 times
fatigue test without any damage.
8. T/P valve and safety valve works together to ensure no excess
heat or pressure inside system;
9. The simple structure is designed for easy installation and
10. INLIGHT aluminum alloy frame is designed for slope and flat
11. Equipped with INLIGHT electric heater and solar controller the
system is more intelligent;
12. Sample solar water heater is installed for every order to
ensure no mistakes or missing parts for customers.